|
Avionics Enclosure
This Rendered image of a 2.25" Avionics Enclosure was designed to fit into a standard 2.25" Avionics mounting tray. Originally designed as a Rugged Jumper Box, the box is fully adaptable and can be modified to house any electronics needed. There is a connector on the back of the unit which allows this unit to connect into an Aircraft's prewired harness.
To meet durability issues, the box is made of 1/4" aluminum plate and bolted together along all seems. It is then Hard Anodized with a black dye to prevent corrosion. Each unit can be custom labled with paint filled engraving.
Engineering & CAD
>Integrated Circuit Design
$1,000 to $2,500
Transportation
488925
Circuit Breaker Panel
This custom circuit breaker panel was designed and fabricated to supply an entire system of avionics, network, and other systems for a much larger project. Some info has been removed.
The panel itself is part of a larger power distribution system which supplies equipment on an as needed basis. It was constructed of 0.90" Aluminum sheet and precision machined to hold any array of breakers, switches and meters. It was then covered with an acrylic overlay for aesthetics, while permitting future changes at a significantly lower cost.
Engineering & CAD
>Electrical
$1,000 to $2,500
Industrial & Defense
488931
Durango Drive Bridge
This 30-foot span, 13.5-foot high, 144-foot long BEBO arch structure provides pedestrian and bicycle underpass complete with light inside the tunnel. The structure incorporates high fill above the arch and HS-25 loading. Provided by BEBOTech and constructed by Frehner Construction, ithe bridge was constructed within the tight budget restraints of the city of Las Vegas, Nevada.
The bridge's architectural pre-cast MSE concrete panels were incorporated into the design to reflect the city's high-profile image. Each hand painted cast-in figurine represents the various users encouraged to utilize the underpass.
Engineering & CAD
>Civil
Not Sure/Confidential
Construction & Building
349052
North Street Bridge
The North Street Bridge Replacement called for a triple 42-foot span and single 1-foot span BEBO arch structure to span the river and a bicycle/pedestrian underpass running alongside of it. Conforming to Ohio Department of Transportation (ODOT) specifications and in order to address vehicular impact requirements, this design incorporated a multitude of cast-n-place reinforced concrete counterforts and tie-beams behind precast panels and pilasters.
The patented curb of end arch elements provides lateral resistance for the wall panels and accentuates the continuous arch look. Black Steel Railing along with red stained brick and gray stained limestone formliners finish the structure, a specification by the city of Lima, Ohio to achieve a natural, architectural look.
Engineering & CAD
>Civil
Not Sure/Confidential
Construction & Building
349067
Cabelas
This single BEBO arch structure provides vehicular overpass into a Cabela's, outdoor equipment store. The precast arch structure was accentuated by natural stone, flanked by fountains, and utlized as the store's main parking lot entrance.
Engineering & CAD
>Civil
Not Sure/Confidential
Construction & Building
349080
|
|