The primary target of CFD in the aerodynamics field is to predict velocity and pressure distribution around bodies (like cars, birds, and airplanes, etc.) and, consequently, determine the pressure, Drag, lift, and moment coefficient. Utilizing this powerful tool, an aerodynamics or aerospace engineer can carry out the best and most optimum design of a car, airplane, space shuttles, etc., without fabricating a prototype to experiment on and therefore, reducing expenses to a high degree. For example, in designing aircraft, we tend to minimize Drag force and increase the lift force. In other words, we tend to increase the Lift to drag force ratio to increase the efficiency of our design. Another case is designing a wind turbine. In contrast to the previous example, we tend to increase the power coefficient related to the moment coefficient, which is related to Drag and force magnitude simultaneously. 

MR-CFD Aerodynamic and Aerospace Services

With several years of experience simulating a wide range of problems in various CFD fields using Fluent software, the MR-CFD team is ready to offer extensive modeling, meshing, and simulation services. Simulation Services for aerodynamic and aerospace engineering are categorized as follows:

• Simulation and analysis of helicopters, airplanes, quadcopters, etc.
• Aerodynamic simulation of flow around the passenger aircraft, unmanned, etc.
• Flow simulation around a variety of cars and vehicles.
• CFD Simulation of aircraft engines turbine, gas turbine, and Jet.
• Simulation of the Jet combustion chamber.
• CFD Simulation of turbofan fan, fan drop, etc.
• Simulation of centrifugal compressors and Jet engine thrust.
• …

You may find the related products in the categories mentioned above in our CFD shop by clicking on the following link:

https://www.mr-cfd.com/product-category/engineering-field/aerodynamics-aerospace/

Our services are not limited to these subjects, and the MR-CFD team is ready to undertake different and challenging projects in Aerodynamics and Aerospace field ordered by our customers. You can consult with our experts first freely and without charge, and then order your project by sending the details of the problem to us using the following address.

info@mr-cfd.com

By entrusting your project to the MR-CFD team, you will not only receive the related project’s files (Geometry, Mesh, Fluent files). Also, you will be provided with an extensive tutorial video showing how you can create the geometry, mesh, and define the needed settings in the Fluent software yourself. And these all come with post-technical support from the MR-CFD team.