have been working as an embedded engineer for more that 20 years. My primary experience is in hardware/software design of DC/AC motor controllers,Smart Meters,Data Loggers, Test Control by the following microcontroller's family: - Microchip PIC -pic16fxx, pic18fxx, dspic33xxxx, pic32MX; - Atmel 8/16/32 bits - Infineon 8/16, - NXP 8/16/32 bits microcontrollers; - STM 32f01/04/07 ARM core; Over the last 3 years I have been working on Arduino's applications including , motion controls, RF and net communications(XBee, bluetooth, WiFi). As an essential part of my experience are desktop software applications with C/C++/C# and LabWindows CVI allowing me to create Human Interface Drivers between PS and microcontroller's applications. I got an experience with CAD/CAM such a ALTIUM,OrCAD, Layout, PSPICE, Proteus 8. I have used the following IDE cores: MPLAB X,Keil uVision 5, Atmel Studio 6.2, CoIDE. Consecutively in the time I have worked with VisualStudio 2005,2008,2010. My experience include several software projects with LabWindows CVI 7.2 and implementing National Instruments NI-DAQmx