Dear Freelancer,
We are looking for a person with skills under Catia or others, we have files under . Catpart and . STP to be able to finalize the creation of a brand new patented engine with a patented bearing system, and to finish the job for the 9th october.
- The first step is to finalize the 3D design of the patented bearing system, all parts are already created and two parts are to be modified.
Without going into details, because confidential, one must imagine a swing with a child at one end. The child on the swing goes from bottom to top, lifts or lowers depending on another piece (named Aba) that rotates at 360°. 360° of Aba = a complete swing high - low cycle.
In order to mitigate the effects of the Top Dead Center, Bottom Dead Center shocks that the child will undergo, the Aba part must be modified twice before and after the PMH and the PMB. This created 3 different thrust angles every 90°.
Once the first 90% was created, the part can be copied in symmetry to make 360°.
We are looking for a person capable of finalizing Aba taking into account the child.
- 2nd step is to install a piece n°4 that requires modification to fit the swing, with a modification on the body of the swing support to accommodate the piece N°4.
- 3rd step is to create a piston type piston liquid (we are talking about the outer oval shape of the piston liquid, not about its inner aspect.) with its chambers for a tolerance of 0.10 microns (that is to say a classic play between piston - cylinder of any automobile engine and motorcycle).
- 4th step depends on the result of the installation of part N°4. The number of rooms is currently 3. We wish to move to 4 bedrooms, then 5 bedrooms, then if possible 6 bedrooms. This involves modifying the shape of the liquid piston and creating a custom one each time to adapt it to the number of chambers requested.
- 4th step depends on the result of the installation of part N°4. The number of rooms is currently 3 according to the drawing with the measurements below. It needs to be finished with 3 bedrooms, then modify the engine to go from 3 to 4 bedrooms. Then from 4 bedrooms to 5 bedrooms. Then from 5 to 6 bedrooms. This involves modifying the entire engine from the shape of the piston type "liquid" according to the photos that were sent, with and without measurement, in order to create custom-made each time to adapt it to the number of requested chambers.
- Step 5 is to modify the current blades by adding blades with honeycomb-shaped holes.
- Step 6 is to create the lubrication holes in the entire engine.
- 7th step is to create a 10-second 3D animation.
- 8th step of creating the industrial drawings for each engine part so that they can be sent to production and creating the prototype.
- Step 9 is to create a friction study of the engine. (option)
- Step 10 is to create a thermodynamic study of the engine to know the heat exchanges that were created in the engine between the chambers. (option)
Our objective is to create a prototype and thus present the results to investors for global marketing.
If this challenge interests you intellectually and you have a passion for creation that revolutionizes, please let us know your offer. We are open to everything since we want the project to become reality.
The first step will be a confidentiality clause to be completed, signed on each page and returned to us accompanied by a copy of your valid passport.
Sincerely,
ANCELIN
... Show more