I developed this project in one of the offline UPS. I used dspic33fj64gs606 I developed in UPS. Again ups in buck / boost and I have developed full-bridge inverter topologies. SNMP AGENT did work. I made a digital audio transmission using i2c with external clipboard. A / D and I developed applications through the DAC. I can use the AT command set. I also judge all communication protocols. I realize projects related to the following written protocols. I did a remote-controlled greenhouse applications with GSM. I perform vehicle tracking and M2M applications. I'm experienced embedded software design with 16/32 bit processors in the C language application development. I use Microchip's 8-bit,16-bit (DSPic), STM32 series processors. Wireless and wired communications ((I2C, UART, USB, SPI), (Modbus, Ethernet, Wi-Fi, BLA, GSM, GPS, GPRS, RF)) and knowledge of the hardware and software design issues I'm experienced. I made electric vehicle production feasibility study. Power electronics, knowledge, communication and energy issues, and I'm experienced. I realized it was my application on renewable energy sources. I produce hydrogen batteries are dry type. I also provides control by making PMG engine processor. I produced generator device for use in wind turbines. I produce electricity generating hydrogen fuel cells and microbial cells. I can take control motors and stepper motors and servo motors as robot control, I made about them. I can use the lab equipment.