Find Freelance Jobs

Design Circuit & Layout for a power board using the AC to DC half Brick Module.Including AC Line filter.

I am looking for someone to rewire a strand of 120V AC LED Christmas Lights to run off of 12 VDC with the same or similar brightness. The intended use is for outdoor off grid lighting, so any modifica…

Looking for a designer and prototype partner to design and prototype a custom carrier PCB for some imaging sensors used in a proprietary composite sensor design. Carrier board will need to provide ph…

Hello ,We have an ongoing project for the esp32. We have different products to produce in the pipeline. Please some modification for the already going projects

Load Flow, Short Circuit,Protective Earthing Conductor Sizing AC Arc Flash Analysis & Result Analyzer, Protective Device Coordination / Selectivity

Need to bandpass 24Ghz to 24.5Ghz, ideally corner frequencies would exist somewhere outside of this. Should be 50-ohm impedance at these frequencies. Will need guidance on cost-effective substrate c…

Hi There!We are a start up company from Hyderabad, India. We actually require a power supply which would convert 240 volts AC to 3.3 volts DC. I have attached a Gerber file in this quote. please look into that and suggest me corrections.Regards,Rajkumar