Banner Image

Skills

  • Electrical Controls Design
  • Electrical Engineering
  • Energy Engineering
  • Engineering
  • Fire Engineering
  • Industrial Design
  • PCB
  • Simulation Modeling

Services

  • Arc Flash Analysis (IEEE 1584-2018)| SKM

    $35/hr Starting at $500 Ongoing

    Dedicated Resource

    Licensed Electrical Engineer | Arc Flash Analysis (IEEE 1584-2018 ) | EasyPower, SKM, ETAP  I deliver IEEE 1584-2018 compliant arc flash, protective device coordination, and power systems studies — formatted...

    Electrical Controls DesignElectrical EngineeringEnergy EngineeringEngineeringFire Engineering

About

Power Systems Engineer | Arc Flash Analysis| SKM | ETAP | EasyPower | PowerWorld | Protection Coordination

Licensed Electrical Engineer (PEC Certified) | 100% Job Success

I deliver arc flash hazard analysis, protection coordination studies, short circuit calculations, and power system models — using SKM PowerTools, ETAP, EasyPower, and PowerWorld Simulator — formatted for direct client submission worldwide.

You provide SLDs, equipment data, and project scope.
I return fully modeled, analyzed, and documented study packages your reviewing engineer can stand behind.

That is exactly what I do.
I work as your dedicated power system analyst. You provide the data — SLDs, equipment nameplates, utility fault information, and your project scope. I deliver fully modeled, thoroughly analyzed, and professionally documented study reports, ready for review, approval, and submission by your licensed or chartered engineer of record.
I do not provide licensed engineering stamps or country-specific certifications. My role is rigorous technical analysis and documentation that gives your approving authority — whether a PE, CEng, or local regulatory engineer — a complete, defensible package to work from.

Services & Deliverables
Arc Flash Hazard Analysis
Applicable frameworks: IEEE 1584-2018, NFPA 70E, IEC standards, and equivalent national regulations
Full equipment and bus modeling from your provided SLDs and equipment data
Short circuit study as the analytical foundation for incident energy calculations
Incident energy levels and arc flash protection boundaries at every studied bus
Arc flash warning label dataset ready for panel installation
Final hazard analysis report structured for regulatory submission or internal safety programs
Arc flash analysis is relevant wherever personnel work on or near energized electrical equipment — not just in the US. If your facility operates at medium or low voltage and workers interact with electrical panels, switchgear, or distribution equipment, this study protects them regardless of your jurisdiction.

Protection Coordination & Short Circuit Studies
Applicable standards: ANSI/IEEE C37, IEC 60909, IEC 60947, BS EN 60909, and equivalent national standards
Short circuit fault current calculations at every system bus (ANSI or IEC methodology)
Equipment duty verification against rated interrupting and withstand capabilities
Time-current curve (TCC) development for overcurrent devices across the system
Relay, fuse, and breaker coordination for maximum selectivity and fault isolation
Coordination study report with recommended device settings and selectivity rationale


Software
ETAP 19/20/21/24 · EasyPower · SKM PowerTools (PTW) · PowerWorld Simulator · DigSILENT PowerFactory · PSCAD · AutoCAD Electrical

Standards Applied
IEEE 1584-2018 · NFPA 70E · ANSI/IEEE C37 · IEC 60909 · IEC 60364 · IEC 61936 · NEC (NFPA 70) · BS 7671 (reference)

Study Types
Arc Flash Hazard Analysis · Short Circuit (ANSI & IEC) · Load Flow · Protection & Coordination · Motor Starting · Harmonic Analysis · Cable Ampacity · Transient Stability

Work Terms

You provide SLDs, equipment data, and project scope.

Attachments (Click to Preview)